清华大学能源与动力工程系

Department of Energy and Power Engineering

姓       名 蒋洪德

技术职务 教授、博导

办公电话 82151165

通讯地址 清华大学热能工程系

电子邮件 jianghd@mail.tsinghua.edu.cn

教育背景

1959-1965 清华大学动力机械系燃气轮机专业本科;

1965-1968 清华大学动力机械系燃气轮机专业研究生;

1978-1981 中国科学院研究生院研究生,硕士;

1987-1989 美国弗吉尼亚理工大学访问山东青岛汽轮机厂技术员、设计科主机组长学者

工作履历

1968-1978  山东青岛汽轮机厂技术员、设计科主机组长

1978-2004  中国科学院工程热物理研究所,历任实习研究、副研究员、研究员、博导,副所长

2005-至今  清华大学教授、博导

学术兼职

1994-2003   北京全三维动力工程公司副总经理、总经理

1999- 至今 中国工程院能源与矿业学部常委

2000- 至今 中国动力工程学会理事、常务理事

2004- 至今 中国工程热物理学会常务理事、副理事长

2008- 至今 燃气轮机与煤气化联合循环国家工程研究中心主任

2015- 至今 中国电机工程学会学术委员会委员兼燃气轮机发电专委会副主任

研究领域

叶轮机械与动力工程;国产重型燃气轮机的研发

研究概况

蒋洪德院士长期从事叶轮机械气动热力学与计算流体力学的研究、工程设计与应用,主持研制了理论先进、程序可靠、系统配套、具有完全自主知识产权的多级汽轮机全三维气动热力设计体系,主持开发了新一代后加载叶型、弯扭叶片、全三维流型、低损失主蒸汽阀门等当代汽轮机通流部分关键部件并用于工程实践,开启了全三维设计技术在我国电力工业老汽轮机通流部分现代化改造的大规模应用,进而推动了我国汽轮机行业设计理论与方法的更新换代,促进了我国汽轮机和电力工业的技术进步。蒋洪德院士在二维和三维叶栅流场计算方法与分析、多级汽轮机气动热力设计理论、设计体系研究开发和工程应用等方面在国内外发表论文140余篇,获专利2项,获国家科技进步二等奖一次、省部级科技进步奖四次。

蒋洪德院士从2002年起以重型燃气轮机核心技术研究与自主化为主要研究方向,曾担任国家重型燃气轮机打捆招标团技术顾问、燃气轮机国家重点基础研究项目(973项目)首席科学家。2008年起参与发起和组建了产学研用结合的燃气轮机与煤气化联合循环国家工程研究中心,主持具有自主知识产权的国产重型燃气轮机的研发工作。2012年起担任航空发动机与燃气轮机国家重大科技专项论证委员会副主任。

奖励与荣誉

国家科技进步二等奖、北京市科技进步一等奖、黑龙江省科技进步一等奖、中国科学院科技进步二等奖、中国科学院自然科学三等奖等

学术成果

论文目录

Li W, Yang L, Ren J, et al. Effect of thermal boundary conditions and thermal conductivity on conjugate heat transfer performance in pin fin arrays[J]. International Journal of Heat and Mass Transfer, 2016, 95: 579-592.

Li W, Ren J, Hongde J, et al. Assessment of six turbulence models for modeling and predicting narrow passage flows, part 2: Pin fin arrays[J]. Numerical Heat Transfer, Part A: Applications, 2016, 69(5): 445-463.

Li W, Ren J, Hongde J, et al. Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets[J]. Numerical Heat Transfer, Part A: Applications, 2016, 69(2): 109-127.

Li X, Ren J, Jiang H. Multi-row film cooling characteristics on a vane endwall[J]. International Journal of Heat and Mass Transfer, 2016, 92: 23-33.

Li W, Chi Z, Kan R, et al. Experimental Investigation of Heat Transfer Dependency on Conjugate and Convective Thermal Boundary Conditions in Pin Fin Channel[C]//ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015: V05AT10A013-V05AT10A013.

Qin Y, Yin H, Ren J, et al. Aerodynamic Analysis of Film Cooling Jet Under Different Main Stream Pressure Gradient[C]//ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015: V05BT12A034-V05BT12A034.

Li M, Li X, Ren J, et al. Overall Cooling Effectiveness Characteristic and Influence Mechanism on an Endwall With Film Cooling and Impingement[C]//ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015: V05AT10A015-V05AT10A015.

Tan Q, Li J, Ren J, et al. Second-Order Viscous/Heat Fluxes Scheme: Hyperbolic System for RANS Flow and Conjugate Heat Transfer Problem in Gas Turbine[C]//ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015: V05AT10A014-V05AT10A014.

Li X, Li M, Ren J, et al. Heat Transfer Measurements of Vane Endwall with Film Cooling and Impingement Cooling[C]//ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015: V05BT12A031-V05BT12A031.

Li X, Ren J, Jiang H. Application of algebraic anisotropic turbulence models to film cooling flows[J]. International Journal of Heat and Mass Transfer, 2015, 91: 7-17.

Li X, Ren J, Jiang H. Film cooling effectiveness distribution of cylindrical hole injections at different locations on a vane endwall[J]. International Journal of Heat and Mass Transfer, 2015, 90: 1-14.

付镇柏,蒋洪德,张珊珊,吕煊. G/H级燃气轮机燃烧室技术研发的分析与思考[J]. 燃气轮机技术,2015,04:1-9+21.

杨力,Kartikeya Tyagi,任静,Srinath Ekkad,蒋洪德. 不同冲击冷却结构对旋转效应的敏感性[J]. 工程热物理学报,2016,01:37-41.

迟重然,任静,蒋洪德,臧述升. 涡轮导叶气膜冷却结构半反设计优化方法[J]. 工程热物理学报,2016,01:62-66.

李雪英,李明飞,任静,蒋洪德. 气膜冷却布置对前缘流动传热的影响[J]. 工程热物理学报,2014,12:2372-2375.

何皑,蒋洪德,谢法. 燃气轮机燃烧基准温度估算方法[J]. 燃气轮机技术,2014,04:10-16.

吴康,任静,蒋洪德. 整级透平中转静轮缘封严问题研究Part:不同封严结构的特性[J]. 工程热物理学报,2015,03:496-500.

谭勤学,任静,蒋洪德. Ma数预处理间断Galerkin算法[J]. 清华大学学报(自然科学版),2015,01:134-140.

李雪英,任静,蒋洪德. 燃烧室温度剖面对静叶端壁冷却的影响[J]. 工程热物理学报,2015,04:752-755.

谭勤学,林立,吴康,任静,蒋洪德. 间断伽辽金方法在燃机空气系统中的应用[J]. 工程热物理学报,2015,06:1201-1206.

谢法,张珊珊,蒋洪德. 入口流动参数脉动对燃气轮机燃烧室燃烧不稳定的影响[J]. 航空动力学报,2015,07:1561-1565.

陈娉婷,李雪英,任静,蒋洪德. 冲击衬套对于一级静叶气膜孔流量分配和气膜冷却效率的影响[J]. 工程热物理学报,2015,08:1662-1665.

林立,吴康,谭勤学,任静,蒋洪德. 小流量下转静系盘腔传热特性[J]. 航空动力学报,2015,09:2058-2065.

陈宏,蒋洪德. 一种镍基单晶合金高温低周疲劳寿命预测方法[J]. 机械强度,2015,05:857-862.

Li, Yang, Jing, Ren, Hongde, Jiang, Phillip, Ligrani. Experimental and Numerical Investigation of Unsteady Impingement Cooling Within a Blade Leading Edge Passage[J]. International Journal of Heat and Mass Transfer, 2014, 71(1): 57-68

Xueying, Li, Jing, Ren, Hongde, Jiang. FILM COOLING MODELING OF TURBINE BLADES USING ALGEBRAIC ANISOTROPIC TURBULENCE MODELS[J]. Journal of Turbomachinery, 2014, 136(11)

Chi, Z, Ren, J, Jiang H,D. Coupled Aero-Thermodynamics Optimization for the Cooling System of a Turbine Vane[J]. Journal of Turbomachinery, 2014, 136(5)

R, Kan, L, Guo, J, Ren, S, Huang, H, D, Jiang, Y, Y, Yan. Determining mainstream reference temperature using the non-dimensional temperature analysis in the transient liquid crystal technique[J]. International Journal of Heat and Mass Transfer, 2014, (72): 201-209

Chang, Han,  Zhongran, Chi,  Jing, Ren1 and Hongde, Jiang. Optimal Arrangement of Combined-Hole for Improving Film Cooling Effectiveness[J]. Journal of Thermal Science and Engineering A[1-45]pplications , 2014, 7(1)

Li, X. Jing, Ren, Hongde, Jiang, Algebraic anisotropic turbulence modeling of compound angled film cooling validated by particle image velocimetry and pressure sensitive paint measurements. Journal of Heat Transfer, 2013. 136(3).

Mingfei Li; Jing Ren; Hongde JiangConjugate Heat Transfer Characteristics of a Highly Thermal-Loaded Film Cooling System in Hot and Multi-Composition Gas Condition. ASME Turbo Expo 2014,Düsseldorf, Germany, June 16–20, 2014

Yanmin Qin,Jing Ren,Hongde JiangEFFECTS OF STREAMWISE PRESSURE GRADIENT AND CONVEX CURVATURE ON FILM COOLING EFFECTIVENESS. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Weihong Li, Li Yang, Jing Ren, Hongde Jiang,Algebraic anisotropic eddy viscosity model for separated flows of internal cooling channels. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Li Yang, Weihong Li, Zhongran Chi, Jing Ren, Hongde Jiang   , Effect of Corrugated Orifice and Pin-Fin on Multiple Array Impingement Cooling with Low Nozzle to Target Distance. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Xueying Li, Jing Ren, Hongde Jiang,Phantom Cooling of Nozzle Trailing Edge Discharge on Blade Surface and Platform. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Xueying Li, Jing Ren, Hongde Jiang,FILM COOLING MODELING OF TURBINE BLADES USING ALGEBRAIC ANISOTROPIC TURBULENCE MODELS. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Han Chang, Ren Jing, Jiang Hongde,Experimental Investigations of Sycee Film Coolng Performance on a Plate and a Tested Vane of an F-Class Gas Turbine. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Chi Zhongran, Han Chang, Li Xueying, Ren Jing, Jiang Hongde.Geometrical Optimization And Experimental Validation Of A Tripod Film Cooling Hole With Asymmetric Side Holes. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Chi Zhongran, Li Xueying, Han Chang, Ren Jing, Jiang Hongde.Optimization Of The Hole Exit Shaping Of Film Holes Without And With Compound Angles For Maximal Film Cooling Effectiveness. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Yin, H. Li, M., Chi, Z., Ren, J., Jiang, H..Effect of Radiative Heat Transfer Factors on Temperature Distribution of a First Stage Vane. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Kan, R., Ren, J., Jiang, H.D.Combined Effects of Perforated Blockages and Pin Fins in a Trailing Edge Internal Cooling Duct. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Qinxue Tan Jing Ren Hongde Jiang.Prediction of 3D Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model. ASME Turbo Expo 2014: Düsseldorf, Germany, June 16–20, 2014

Weihong Li , Jing Ren, Hongde Jiang. Assesment of six turbulence models for pin fin arrays of blade trailing edge.Proceedings of 5th ISJPPE.Proceedings of 5th ISJPPE:2014,Beijing,China

Zhongran Chi, Kan Rui,Jing Ren, Hongde Jiang,Experimental and Numerical Study of the Anti-Crossflows Impingement Cooling Structure,International Journal of Heat and Mass Transfer,2013,64: 567–580

Hong, Y., et al. Effect of inlet swirl on the model leading edge of turbine vane. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Chi, Z., J. Ren and H. Jiang. Cooling structure optimization for a rib-roughed channel in a turbine rotor blade. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Yang, L., et al. Effect of film cooling arrangement on impingement heat transfer on turbine blade leading edge. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Rui, K., et al. Effect of RIB configuration and lateral ejection on a high aspect ratio trailing edge channel. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Li, X., J. Ren and H. Jiang. Full field algebraic anisotropic eddy viscosity model for the film cooling flows. in ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012, June 11, 2012 - June 15, 2012. 2012. Copenhagen, Denmark: American Society of Mechanical Engineers.

Chi, Z., et al. Multi-dimensional platform for cooling design of air-cooled turbine blades. in ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012, June 11, 2012 - June 15, 2012. 2012. Copenhagen, Denmark: American Society of Mechanical Engineers.

Peng Sun, Jing Ren, Hongde Jiang, Radiative models for hot gas with various H2O-CO2 ratios. in ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012, June 11, 2012 - June 15, 2012. 2012. Copenhagen, Denmark: American Society of Mechanical Engineers.

Lin Li, Jing Ren, Hongde Jiang. Heat transfer characteristics of a rotor-stator system with small radial outflow. in ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012, June 11, 2012 - June 15, 2012. 2012. Copenhagen, Denmark: American Society of Mechanical Engineers.

Wu Kang,Ren Jing,Jiang Hongde,Thermodynamics Characteristic of the Flow and Heat Transfer in Rotating Cavity,Proceedings of 4th International Symposium on Jet Propulsion and Power Engineering,September 10-12, 2012, Xi’an, China,ISJPPE-2012- A0125

Yang Li, Ren Jing, Jiang Hongde,Experimental and Numerical Investigation of Impingement Cooling with Spent Flow in the Blade Leading Edge,Proceedings of 4th International Symposium on Jet Propulsion and Power Engineering,September 10-12, 2012, Xi’an, China,ISJPPE-2012- A0127

Li XueyingRenJingJiang Hongde,Film Cooling Prediction on a Turbine Vane using Algebraic Anisotropic Eddy Viscosity Method,ASIAN CONGRESS ON GAS TURBINES Shanghai, P. R. China, August 20-22, 2012, ACGT2012-4075

Kan Rui ,Yang Li, Ren Jing, Jiang Hongde,Rib Induced Heat Transfer Development inside a Gas Turbine Internal Cooling Channel,ASIAN CONGRESS ON GAS TURBINES Shanghai, P. R. China, August 20-22, 2012, ACGT2012-4078

Wei ChenJing Ren and Hongde Jiang,Effect of Turning Vane Configurations on Heat Transfer and Pressure Drop in a Ribbed Internal Cooling System,Journal of Turbomachinery. v 133, n 4, April 21, 2011

Li, X., R. Jing and H. Jiang. Algebraic anisotropic eddy-viscosity modeling for application to turbulent film cooling flows. in ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011, June 6, 2011 - June 10, 2011. 2011. Vancouver, BC, Canada: American Society of Mechanical Engineers.

Peng Sun, Wenping Wan, Jing Ren, Hongde Jiang. Effect of the hot gas composition on a highly thermally loaded film cooling system. in ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011, June 6, 2011 - June 10, 2011. 2011. Vancouver, BC, Canada: American Society of Mechanical Engineers.

Wenping Wan, Peng Sun, Jing Ren, Hongde Jiang. Radiation Effectiveness on the Aero- and Thermodynamics in A Highly Thermally Loaded Film Cooling System. in ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011, June 6, 2011 - June 10, 2011. 2011. Vancouver, BC, Canada: American Society of Mechanical Engineers.

Li, L., R. Jing and J. Hongde, Application of -Re transition model for internal cooling simulation. Heat Transfer - Asian Research, 2011. 40(1): p. 69-77.

Wang Wenping, Ren Jing, Jiang Hongde,Effects of Radiative Heat Transfer on a Highly Thermal Loaded Film Cooled Plate,Proceedings of 3rd ISJPPE(2010-ISJPPE-2023), 2010.09.17-21, Nanjing, China

Li Jia, Ren Jing, Jiang Hongde,Film Cooling Performance of the Embedded Holes in Trenches with Compound Angles,Proceedings of the ASME Turbo Expo 2010, June14-18, Glasgow, UK. GT2010-22337

Wei Chen, Jing Ren and Hongde Jiang,Verification of RANS for analyzing convective cooling system with and without ribs,Proceedings of the ASME Turbo Expo 2009, June 8-12, 2009, USA. GT2009-59427

Tan Qinxue, Ren Jing, Jiang Hongde,Prediction of flow features in rotating cavities with axial throughflow by RANS and LES,Proceedings of the ASME Turbo Expo 2009, June 8-12, 2009, USA. GT2009-59428

刘捷,韩振兴,蒋洪德,刘建军,周嗣京. 不同复合角对平板气膜冷却特性影响的实验研究[J]. 工程热物理学报,2008,08:1311-1315.

Wu, K., et al., Rotor-stator rim seal analysis in one stage gas turbine Part I: Ingestion and seal. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(5): p. 873-877.

Li, X., J. Ren and H. Jiang, Turbulence modeling of film cooling with algebraic anisotropic turbulent scalar-flux correction. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(2): p. 247-251.

Han, C., J. Ren and H. Jiang, Experimental investigation of film cooling of the leading edge and pressure side of a turbine vane. Qinghua Daxue Xuebao/Journal of Tsinghua University, 2014. 54(6): p. 769-774.

Qin, Y., J. Ren and H. Jiang, Effects of streamwise pressure gradient on film cooling effectiveness. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(3): p. 461-464.

Li, M., et al., Hot temperature effects characteristic of turbine cooling in conjugate heat transfer condition. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(8): p. 1513-1516.

Wu, K., et al., Analysis and optimization of interaction between endwall flank flow and turbine rotor-stator rim seal. Tuijin Jishu/Journal of Propulsion Technology, 2014. 35(6): p. 758-765.

Chi, Z., J. Ren and H. Jiang, Heat transferring of channels with repeated ribs in turbine blades Part II: Conjugate heat transfer characteristics. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(1): p. 42-45.

Yang, L., J. Ren and H. Jiang, A modified 1D network model for double wall cooling elements. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(10): p. 1943-1946.

Li, W., et al., Algebraic anisotropic eddy viscosity model for separated flows of internal cooling channels. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014. 35(9): p. 1727-1732.

Chi, Z., J. Ren and H. Jiang, Heat transferring of channels with repeated ribs in turbine blades part1: Mechanism of flow and convective heat transfer. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(4): p. 624-627.

Li, X., et al. Algebraic anisotropic turbulence modeling of compound angled film cooling validated by PIV and PSP measurements. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Han, C., et al., Unsteady characteristic of film cooling and phantom cooling on the first stage of a gas turbine: Part 1 - Vane cascade. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(5): p. 845-848.

Li, X., et al., Characteristics of fan shaped hole film cooling. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(1): p. 55-58.

Chi, Z., J. Ren and H. Jiang. Coupled aero-thermodynamics optimization for the cooling system of a turbine vane. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Han, C., et al. Optimal arrangement of combined-hole for improving film cooling effectiveness. in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013, June 3, 2013 - June 7, 2013. 2013. San Antonio, Tx, United states: American Society of Mechanical Engineers.

Han, C., et al., Unsteady characteristic of film cooling and phantom cooling on the first stage of a gas turbine: Part 2 - Blade cascade. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(12): p. 2258-2261.

Sun, P., et al., Heat transfer characteristics of film cooling in the non-transparent gas environment. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(2): p. 249-252.

Li, X., J. Ren and H. Jiang, Influence of different turbulence models in predicting convective heat transfer in a cascade. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(6): p. 1042-1046

Li, M., et al., Heat transfer character of film cooling combined with TBCs in hot and multi-composition gas condition. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2013. 34(7): p. 1251-1255.

Lin, L., J. Ren and H. Jiang, Heat transfer characteristic of rotor-stator system with small radial outflow. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2012. 33(7): p. 1122-1126.

Yin, H., J. Ren and H. Jiang, Effects of inlet swirl condition on the flow and heat transfer performance of gas turbine vane. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2012. 33(11): p. 1868-1871.

Chen, W., et al., Application of transient liquid crystal on internal cooling research of gas turbine airfoil. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2012. 33(4): p. 665-669.

Yin, H., et al., Research on the effect of combustor outlet radiation on the film cooling heat transfer. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2012. 33(2): p. 214-217.

Han, C., J. Ren and H. Jiang, Multi-parameter influence on film cooling of blade tip. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2012. 33(9): p. 1501-1504.

Li, X., J. Ren and H. Jiang, Application of the anisotropic eddy-viscosity model to film cooling flows with different geometries. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2012. 33(4): p. 578-582.

Li, X., J. Ren and H. Jiang, Improved eddy-viscosity modelling of film cooling flows. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2011. 32(4): p. 573-576.

Sun, P., J. Ren and H. Jiang, Sequential algorithm based flexible-fuel gas turbine thermodynamic analysis. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2011. 32(1): p. 29-32.

Qin, Y., et al., Prediction of the adiabatic film cooling effectiveness influenced by multi parameters based on BP neural network. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2011. 32(7): p. 1127-1130.

Li, J., J. Ren and H. Jiang, Effects of density ratio and blowing ratio on the film cooling effectiveness on a turbine vane. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2011. 32(8): p. 1295-1298.

Yang, L., et al., Aero-and thermodaynamic features of the flow fields in the internal cooling channels with film cooling holes. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2011. 32(8): p. 1385-1388.

Li, J., et al., Film cooling performance of the embedded holes in trenches with compound angles. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2010. 31(2): p. 239-242.

刘捷,安柏涛,蒋洪德,刘建军. 静叶前缘气膜冷却特性的数值模拟及改进设计[J]. 航空动力学报,2009,02:331-339.

谭勤学,任静,蒋洪德. 轴向通流旋转盘腔中流动与传热数值研究[J]. 工程热物理学报,2009,07:1129-1131.

林立,任静,蒋洪德. γ-Re_θ转捩模型在内部冷却叶片中的应用[J]. 工程热物理学报,2009,11:1849-1852.

李佳,任静,蒋洪德. 燃气轮机高温叶片气膜冷却系统的研究进展[A]. 中国动力工程学会透平专业委员会.2009年中国动力工程学会透平专业委员会2009年学术研讨会论文集[C].中国动力工程学会透平专业委员会:,2009:10.